查看: 38|回复: 0

[求助] FIR303c TTL刷机出现timeout

[复制链接]

主题

好友

5814

积分

中校

签到天数: 132 天

[LV.7]常住居民III

发表于 2016-11-5 12:50 |显示全部楼层
TG-NET
Anywlan微信公众号
ttl刷机出现timeout  求助 怎么办

Decompressing...done

CFE version 5.100.138.2205 based on BBP 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Tue Feb 25 14:33:57 CST 2014 (guojianping@Server-SW-X03)
Copyright (C) 2000-2008 Broadcom Corporation.
Init Arena
Init Devs.
Boot partition size = 131072(0x20000)
Found an ST compatible serial flash with 64 64KB blocks; total size 4MB
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.100.138.2205
CPU type 0x19749: 300MHz
Tot mem: 16384 KBytes
CFE mem:    0x80700000 - 0x80798CD0 (625872)
Data:       0x8072E840 - 0x80731A90 (12880)
BSS:        0x80731A90 - 0x80732CD0 (4672)
Heap:       0x80732CD0 - 0x80796CD0 (409600)
Stack:      0x80796CD0 - 0x80798CD0 (8192)
Text:       0x80700000 - 0x8072E838 (190520)
Device eth0:  hwaddr 00-6B-8E-2E-9B-55, ipaddr 192.168.0.1, mask 255.255.255.0
        gateway not set, nameserver not set
***Press <Ctrl+C> key enter boot command line.***
Loader:raw Filesys:tftp Dev:eth0 File:192.168.1.3:vmlinuz Optionsnull)
Loading: Failed.
Could not load 192.168.1.3:vmlinuz: Timeout occured
Loader:raw Filesys:raw Dev:flash0.os File: Optionsnull)
Loading: ..... 2227132 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
IP Filter: v3.4.35 initialized.  Default = pass all, Logging = disabled
PCI: no core
PCI: no core
PCI: Fixing up bus 0
wl_pci_probe: find [14e4:4347] bus 0 slot 1 func 0 irq 1
14)
sys_led_test_gpio=-1
No default sys led configuration
reset_btn_gpio=-1
No default reset_btn_gpio configuration
System start
vlan1: VLAN interface created
wlconf: PHYTYPE: 4
Exception --------------------------------------------------------------
  Type: TLB miss (LoadA000000    R20   801D0A14    R28   80227DB0
    R5    00000000    R13   80284374    R21   04000000    R29   80295E70
    R6    00000060    R14   8028436C    R22   00000020    R30   806386C0
    R7    00000000    R15   802843AC    R23   00000001    R31   8000D738
    HI    00001A00    LO    00000000    SR    10009Decompressing...done

CFE version 5.100.138.2205 based on BBP 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Tue Feb 25 14:33:57 CST 2014 (guojianping@Server-SW-X03)
Copyright (C) 2000-2008 Broadcom Corporation.
Init Arena
Init Devs.
Boet0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.100.138.2205
CPU type 0x19749: 300MHz
Tot mem: 16384 KBytes
CFE mem:    0x80700000 - 0x80798CD0 (625872)
Data:       0x8072E840 - 0x80731A90 (12880)
BSS:        0x80731A90 - 0x80732CD0 (4672)
Heap:       0x80732CD0 - 0xext:       0x80700000 - 0x8072E838 (190520)
Device eth0:  hwaddr 00-6B-8E-2E-9B-55, ipaddr 192.168.0.1, mask 255.255.255.0
        gateway not set, nameserver not set
***Press <Ctrl+C> key enter boot co^C
CFE> ^C
CFE> ^C
CFE> ^C
CFE> ^C
CFE> ^C
CFE> ^C
CFE> ^C
CFE> ^C
CFE> ^C
CFE> ^C
CFE> ^C
CFE> ^C
CFE> ^C
CFE> ^C
CFE> ^C
CFE> ^C
CFE> ^C
CFE> flash -noheader 192.168.0.3:/a1.bin flash1.trx
Reading 192.168.0.3:/a1.bin: Failed.: Timeout occured
*** command status = -21
CFE> flash -noheader 192.168.1.3:/a1.bin flash1.trx
Reading 192.168.1.3:/a1.bin: Failed.: Timeout occured
*** command status = -21
CFE> flash -noheader 192.168.1.3:/a1.bin flash1.trx
Reading 192.168.1.3:/a1.bin: Failed.: Timeout occured
*** command status = -21
CFE>
您需要登录后才可以回帖 登录 | 我要加入

本版积分规则

Archiver| 手机版| 中国无线门户 ( 粤ICP备11076993 )  |网站地图    小黑屋 | 免责声明

GMT+8, 2016-12-3 08:21

Powered by Discuz! X3.2

© 2003-2013 广州威思信息科技有限公司

返回顶部 返回列表